Primer

We always recommend the use of Humbrol No.1 Primer before applying paint. This eliminates any grease and/or other elements from the surface of the plastic, which helps the paint adhere to the model.
 

Humbrol currently has three primers in the Acrylic Spray range:

• No.1 Primer - AD6001 – For general purpose use.
• No.33 Black Matt - AD6033 – Use when requiring a dark top coat, for example, Black, Dark Grey or Dark Green.
• No.34 White Matt - AD6034 – Use when requiring a bright top coat, for example, Red, Yellow or Orange.
   

Usage

A solvent-based, fast-drying paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic and Clear finishes are available.
 

Substrate

A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster and sealed hardboard. Also most applications in general DIY and automotive. Always try on a small test area to check suitability.
 

Coverage

Depends on application and thickness of coats.
 

Application

Aerosol spray. Spray at least 25cm from the substrate and spray with an even back and forth action.
 

Drying Time

15-30 minutes

How To Clean

Hold can upside down after use and depress nozzle for a few seconds to clean. Can be removed if not fully dry with Humbrol Enamel Thinners. Product is permanent once dry.