AD6049 Acrylic Varnish Spray - 49: Matt - 150ml
Product Info
Humbrol Acrylic Varnish Spray 49 is a Clear Matt varnish supplied in a 150ml aerosol. The solvent-based formula dries Clear and transparent, sealing painted surfaces without adding sheen. Humbrol has been the modeller's standard for decades, and this is the flat overcoat for finished Acrylic work.
Key Features
- Fast-dry formula: touch dry in 15 - 30 minutes, hard dry in 1 - 2 hours
- Sprays a flat, even Matt coat in two thin passes from 25cm or more
- Protects Acrylic paint and Acrylic Spray Paint as a final overcoat
- Can be lifted with Enamel Thinners before it dries; permanent once hard dry
- Warning: solvent-based aerosol. Use in a well-ventilated area, away from ignition sources
- Not suitable for modellers under 14 years
Ideal For
- Finishing plastic scale model kits, from 1:72 aircraft to 1:35 armour
- Sealing decals and panel-line washes under one flat coat
- Knocking back shine on Acrylic-painted surfaces
How to Use
Shake the can thoroughly before use; insufficient shaking is the main cause of white frosting. Spray from at least 25cm away, using an even back-and-forth action. Two thin coats are preferable to one thick coat, and the paint beneath should be fully cured first.
What's Inside
Recommended For You
Tech Specs
- Item Length - Without Packaging (cm)
- 5.2
- Item Height - Without Packaging (cm)
- 14.8
- Item Width - Without Packaging (cm)
- 5.2
- How many pieces will be found in the box opened by the customer?
- 1
- Item Scale
- No Scale
- Contents (what's in the box) sets
- 1x 150ml Aerosol
EN | Danger | Contains acetone. Repeated exposure may cause skin dryness or cracking. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid breathing vapours. Use only outdoors or in a well-ventilated area. Wear protective gloves/eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor if you feel unwell. If eye irritation persists: Get medical advice/attention. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F. Dispose of contents/container in accordance with local regulations.