AD6064 Acrylic Spray - 64: Light Grey - Matt - 150ml
Product Info
Humbrol No. 64 Light Grey is a Matt Acrylic spray paint supplied in a 150ml aerosol. It is solvent-based and fast drying, developed for plastic model kits and resin models, and it also takes to many other substrates. No. 64 is a long-standing Humbrol shade, used in RAF aircraft liveries and military vehicle schemes. Satin, Gloss and Metallic finishes are available across the same range.
Key Features
- Matt finish in No. 64 Light Grey, 150ml aerosol
- Fine nozzle for controlled, drip-free coverage over large panels
- Touch dry in 15 - 30 mins; hard dry in 1 - 2 hours
- Two thin coats give an even Matt finish with strong opacity
- Cures to a hard, scratch-resistant surface that stands up to handling
Ideal For
- Plastic kits and resin figures, plus wood, glass, ceramics and metal
- Base-coating 1:48 and 1:72 aircraft, armour and vehicle hulls
- Model railway scenery and rolling stock
How to Use
Spray at least 25cm from the surface using an even back and forth motion. Apply two thin coats, allowing the first to hard-dry before the second; remove paint with Enamel Thinners before it fully dries, as it is permanent once dry. Warning: use this solvent-based aerosol in a well-ventilated area away from flames; suitable for +14 Years and over.
What's Inside
Recommended For You
Tech Specs
- Item Length - Without Packaging (cm)
- 14.8
- Item Height - Without Packaging (cm)
- 5.2
- Item Width - Without Packaging (cm)
- 5.2
- How many pieces will be found in the box opened by the customer?
- 1
- Item Scale
- No Scale
- Contents (what's in the box) sets
- 1x 150ml Aerosol
EN | Danger | Contains acetone. Repeated exposure may cause skin dryness or cracking. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Use only outdoors or in a well-ventilated area. Wear protective gloves/eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If eye irritation persists: Get medical advice/attention. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F. Dispose of contents/container in accordance with local regulations.