AV0202 Enamel Wash - White - 28ml

Enamel Wash in White, supplied in a 28ml pot. This solvent-based wash creates weathered, oiled and grime effects on plastic model kits and resin models. Humbrol has been the modeller's standard for decades, and this wash suits most other substrates too. The formula is dense, so thinning with Humbrol Enamel Thinners is recommended before you start.

Key Features

• Supplied as 1x 28ml plastic tub
• White colourway for light weathering effects over darker base coats
• Touch dry: 10 - 20 minutes. Hard dry: not stated; the wash may resist removal within a couple of hours
• Dense consistency that thins down, covering more surface per pot than pre-thinned washes
• Mixes with other Washes and weathering powders for layered effects

Ideal For

• Panel line washing and recess shading on naval vessel kits
• Salt streaks, dust deposits and faded finishes on military vehicle models
• Most plastics, resin, wood, glass, ceramics, metal and sealed plaster

How to Use

Brush straight from the jar or palette, thinning with Humbrol Enamel Thinners for finer control. Two thin coats are preferable to one thick coat, and brushes can be cleaned with Enamel Thinners (AC7501/AC7430). Warning: solvent-based; use in a well-ventilated area, avoid prolonged skin contact, and keep away from children under 14 years.